Verifying the configuration, Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 446
Advertising
430
Figure 456 Configuring an accounting method for the ISP domain
6.
Enable the Telnet service.
a.
From the navigation tree, select Network > Service.
b.
Select the Enable Telnet service box.
c.
Click Apply.
Figure 457 Enabling the Telnet service
7.
Log in to the CLI, and configure the VTY user interfaces to use AAA for user access control.
<AC> system-view
[AC] user-interface vty 0 4
[AC-ui-vty0-4] authentication-mode scheme
[AC-ui-vty0-4] quit
Verifying the configuration
Telnet to the AC and enter the username hello@bbb and password abc. You can log in and access
commands of levels 0 through 3.
Configuration guidelines
When you configure the RADIUS client, follow these guidelines:
Advertising
This manual is related to the following products: