H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 208)

192
b. Select the Enable option for DHCP Relay, and select 1 for Server Group ID.
c. Click Apply.
Figure 176 Enabling the DHCP relay agent on an interface and correlate it with a server group
DHCP snooping configuration example
Network requirements
As shown in Figure 177 , a DHCP snooping device (AC) is connected to a DHCP server through
GigabitEthernet 1/0/2, and to an AP through GigabitEthernet 1/0/1.
• Enable DHCP snooping on the AC and configure DHCP snooping to support Option 82. Configure
the handling strategy for DHCP requests containing Option 82 as replace.
• Enable GigabitEthernet 1/0/2 to forward DHCP server responses; disable GigabitEthernet 1/0/1
from forwarding DHCP server responses.
• Configure the AC to record clients' IP-to-MAC address bindings in DHCP-REQUEST messages and
DHCP-ACK messages received from a trusted port.
Figure 177 Network diagram
Configuration procedure
1. Enable DHCP snooping:
a. Select Network > DHCP from the navigation tree.
b. Click the DHCP Snooping tab.
c. Select the Enable option for DHCP Snooping.