H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 200)

184
Configuring and displaying clients' IP-to-MAC
bindings
1. Select Network > DHCP from the navigation tree
2. Click the DHCP Relay tab to enter the page as shown in Figure 160 .
3. In the User Information field, click User Information to view static and dynamic bindings, as shown
in
Figure 164 .
Figure 164 Displaying clients' IP-to-MAC bindings
4. Click Add to enter the page shown in Figure 165 .
Figure 165 Creating a static IP-to-MAC binding
5. Configure static IP-to-MAC binding as described in Table 76 .
6. Click Apply.
Table 76 Configuration items
Item Description
IP Address Enter the IP address of a DHCP client.
MAC Address Enter the MAC address of the DHCP client.
Interface Name
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent.
Otherwise, address entry conflicts may occur.