H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 77)

61
Table 25 Field description
Field Description
AP Name Name of the associated access point.
Radio Id Radio ID.
SSID SSID of the AP.
BSSID BSSID of the AP.
MAC Address MAC Address of the client.
RSSI
Received signal strength indication. This value indicates the client signal
strength detected by the AP.
Transmitted Frames Number of transmitted frames.
Back Ground(Frames/Bytes) Statistics of background traffic, in frames or in bytes.
Best Effort(Frames/Bytes) Statistics of best effort traffic, in frames or in bytes.
Video(Frames/Bytes) Statistics of video traffic, in frames or in bytes.
Voice(Frames/Bytes) Statistics of voice traffic, in frames or in bytes.
Received Frames Number of received frames.
Discarded Frames Number of discarded frames.
NOTE:
You can collect statistics of priority queues such as Back Ground, Best Effort, Video and Voice on a QoS
client only. Traffic including SVP packets sent and received on a client where QoS is not enabled falls into
Best Effort priority queue. Therefore, the queues collected may be different from the queues actually sent.
You can collect statistics of priority queues carried in Dot11E or WMM packets; otherwise, statistics
collection of priority queues on the receive end may fail.
Displaying client roaming information
Select Summary > Client from the navigation tree to enter the Client page, click the Roam Information tab
on the page, and click the name of the specified client to view the roaming information of the client.
Client roaming information is as shown in
Figure 40 . For the detailed description of the fields in the client
roaming information, see Table 26 .