H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 237)

221
3. Configure the AP group as described in Table 87 .
4. Click Apply.
Table 87 Configuration items
Item Description
AP Group ID Display the ID of the selected AP group.
Description Select this option to configure a description for the AP group.
Exist AP List
Set the APs in the configured AP group.
• To add the APs to the Selected AP List, click the APs to be
added to the AP group, and click the > button in the AP List
area.
• To delete the selected APs from the AP group, select the APs
to be deleted in the Selected AP List, and click the < button.
The APs to be added in AP Group ID should be created by
selecting AP > AP Setup first.
Applying the AP group
Select Authentication > Users from the navigation tree to apply the AP group. For the related
configuration, see "Users."
AP connection priority configuration example
Network requirements
Configure a higher AP connection priority on AC 1 to enable the AP to establish a connection with AC
1.
Figure 209 Network diagram
Configuring AC 1
1. Configure AP-related information:
For the detailed configuration, see "Access service configuration."
2. Configure an AP connection priority:
a. Select AP > AP Setup from the navigation tree.
b. Click the icon corresponding to the target AP to enter the AP setup page.
AC 1
AC 2
AP
Client
Switch