H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 542)

526
a. Select QoS > Time Range from the navigation tree.
b. Click the Add tab.
c. On the page as shown in Figure 554 , enter the time range name test-time, select the Periodic
Time Range option, set the Start Time to 8:00 and the End Time to 18:00, and select the
options Sun through Sat.
d. Click Apply.
Figure 554 Defining a time range covering 8:00 to 18:00 every day
2. Add an advanced IPv4 ACL:
a. Select QoS > ACL IPv4 from the navigation tree.
b. Click the Add tab.
c. Enter the ACL number 3000.
d. Click Apply.