H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 418)

402
Figure 429 Creating a wireless service
d. Enter 2 in the VLAN (Untagged) field, enter 2 in the Default VLAN field, and click Apply.
A configuration progress dialog box appears.
e. After the configuration process is complete, click Close.
Figure 430 Configuring parameters for the wireless service
8. Enable the wireless service.
a. On wireless service list as shown in Figure 431 , select the box before wireless service abc.
b. Click Enable.
A configuration progress dialog box appears.
c. After the configuration process is complete, click Close.