H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 303)

287
Figure 298 AP setup
5. Configure wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click Add.
c. On the page that appears, set the service name to dot1x, select the wireless service type crypto,
and click Apply.
Figure 299 Creating a wireless service
6. Configure 802.1X authentication.
After you create a wireless service, the wireless service configuration page appears.
a. In the Security Setup area, select Open-System from the Authentication Type list, select the
Cipher Suite box, select AES-CCMP from the Cipher Suite list, and select WPA2 from the
Security IE list.
b. Select the Port Set box, and select userlogin-secure-ext from the Port Mode list.
c. Select system from the Mandatory Domain list.
d. Select EAP from the Authentication Method list.
e. Disable Handshake and Multicast Trigger (recommended).
f. Click Apply.
g. A progress dialog box appears. During the process, another dialog box appears asking you
whether to enable EAP authentication. Click OK.
h. After the configuration progress is complete, click Close.