H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 600
584
Figure 616 Configuring band navigation
2.
Configure band navigation as described in
.
3.
Click Apply.
Table 207 Configuration items
Item Description
Band Navigation
•
Enable—Enable band navigation.
•
Disable—Disable band navigation.
By default, band navigation is disabled globally.
Session Threshold
•
Session Threshold—Session threshold for clients on the 5 GHz band.
•
Gap—Session gap, which is the number of clients on the 5 GHz band minus the
number of clients on the 2.4 GHz band.
If the number of clients on the 5 GHz radio has reached the upper limit, and the gap
between the number of clients on the 5 GHz radio and that on the 2.4 GHz radio has
reached the upper limit, the AP denies the client’s association to the 5 GHz radio, and
allows new clients to associate to the 2.4 GHz radio.
When band navigation is enabled, the value is 0 by default. To restore the default value
0, delete the configured number.
Gap
Max Denial Count
Maximum denial count of client association requests.
If a client has been denied more than the maximum times on the 5 GHz radio, the AP
considers that the client is unable to associate to any other AP, and allows the 5 GHz
radio to accept the client.
When band navigation is enabled, the value is 0 by default. To restore the default value
0, delete the configured number.
RSSI Threshold
Band navigation RSSI threshold.
The AP checks the RSSI of a dual-band client before directing the client to the 5 GHz
radio. If the RSSI is lower than the value, the AP does not direct the client to the 5 GHz
band.