H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 213)

197
Figure 182 Creating a static domain name resolution entry
3. Configure the parameters as described in Table 79 .
4. Click Apply.
Table 79 Configuration items
Item Description
Host Name
Configure the mapping between a host name and an IP address in the static domain
mane table.
Each host name corresponds to only one IP address. If you configure multiple IP
addresses for a host name, the last configured one takes effect..
Host IP Address
Configuring dynamic domain name resolution
1. Select Network > DNS from the navigation tree.
2. Click the Dynamic tab to enter the page shown in Figure 183 .
3. Select the Enable option for Dynamic DNS.
4. Click Apply.