H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 41)

25
Function menu Description User level
Modify Modify FTP or Telnet user information. Management
Remove Remove an FTP or a Telnet user. Management
Switch To
Management Switch the current user level to the
management level.
Monitor
SNMP
Setup
Display and refresh SNMP
configuration and statistics
information.
Monitor
Configure SNMP. Configure
Community
Display SNMP community information. Monitor
Create, modify, and delete an SNMP
community.
Configure
Group
Display SNMP group information. Monitor
Create, modify, and delete an SNMP
group.
Configure
User
Display SNMP user information. Monitor
Create, modify, and delete an SNMP
user.
Configure
Trap
Display the status of the SNMP trap
function and information about target
hosts.
Monitor
Enable or disable the SNMP trap
function, or create, modify, and delete
a target host.
Configure
View
Display SNMP view information. Monitor
Create, modify, and delete an SNMP
view.
Configure
Loopback
Perform the loopback test on Ethernet
interfaces.
Configure
Network
MAC
MAC
Display MAC address information. Monitor
Create or remove MAC addresses. Configure
Setup
Display and configure MAC address
aging time.
Configure
VLAN
VLAN
Display all VLANs on the device and
information about their member ports.
Monitor
Create, modify, and delete VLANs. Configure
Port
Display VLANs to which a port on the
device belongs.
Monitor
Modify the VLANs to which a port
belongs.
Configure
ARP
Management ARP Table
Display ARP table information. Monitor
Add, modify, or delete an ARP entry. Configure