H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 93)

77
Figure 54 Configuring Switch as the NTP server of AC
3. Enter 24 for the ID of key 1, and aNiceKey for the key string. Enter 1.0.1.12 in the NTP Server 1
box and 24 in the Reference Key ID box.
4. Click Apply.
Verifying the configuration
After the above configuration, the current system time displayed on the System Time page is the same for
AC and Switch.
Configuration guidelines
• A device can act as a server to synchronize the clock of other devices only after its clock has been
synchronized. If the clock of a server has a stratum level higher than or equal to that of a client's
clock, the client will not synchronize its clock to the server's.
• The synchronization process takes a period of time. The clock status may be displayed as
unsynchronized after your configuration. In this case, you can refresh the page to view the clock
status later on.
• If the system time of the NTP server is ahead of the system time of the device, and the difference
between them exceeds the Web idle time specified on the device, all online Web users are logged
out because of timeout.