H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 129)

113
The Add rule for the view ViewDefault window appears.
Figure 84 Adding rules to an SNMP view
4. Configure the parameters as described in Table 49 .
5. Click Apply.
NOTE:
You can modify the rules of a view in the page you enter by clicking the icon of that view.
Configuring an SNMP community
1. Select Device > SNMP from the navigation tree.
2. Click the Community tab.
The community tab page appears.
Figure 85 Configuring an SNMP community
3. Click Add.
The Add SNMP Community page appears.