Configuring the radius server (imcv3) – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 296
280
c.
Click Enable.
A configuration progress dialog box appears.
d.
After the configuration process is complete, click Close.
Figure 286 Enabling 802.11n(2.4GHz) radio
Configuring the RADIUS server (IMCv3)
NOTE:
The following takes the IMC (IMC PLAT 3.20-R2602 and IMC UAM 3.60-E6102) as an example to
illustrate the basic configuration of the RADIUS server.
1.
Add an access device.
a.
Click the Service tab in the IMC Platform.
b.
Select Access Service > Access Device from the navigation tree.
c.
Click Add.
d.
On the page that appears, add expert for Shared Key, add ports 1812 and 1813 for
Authentication Port and Accounting Port respectively, select LAN Access Service for Service
Type, select H3C for Access Device Type, select or manually add an access device with the IP
address 10.18.1.1, and click Apply.