H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 527)

511
Table 172 Configuration items
Item Description
Please select the interface type
Select the type of the ports to be configured. The interface types available for
selection depend on your device model.
IMPORTANT:
If a WLAN-ESS interface in use has WLAN-DBSS interfaces created on it, its
priority cannot be modified. To modify the priority of the WLAN-ESS interface,
you must stop the service the interface provides (make the current users on the
interface offline).
Trust Mode
Select the priority trust mode:
• Dot1p—Uses the 802.1p priority of received packets for mapping.
• Dscp—Uses the DSCP value of received packets for mapping.
• Dot11e—Uses the 802.11e priority of received packets for mapping. This
option is applicable to only WLAN-ESS interfaces.
IMPORTANT:
Support for priority trust modes depends on the interface type. The supported
priority trust modes are shown in the Trust Mode list.
(Select the ports)
Specify the ports to be configured.
Click the ports to be configured in the port list. You can select one or more
ports.
Approach 2
1. Select QoS > Port Priority from the navigation tree to enter the page shown in Figure 542 .
Figure 542 Port priority
2. Click the icon for a port to enter the page for configuring the priority and priority trust mode of
the port, as shown in
Figure 543 .