H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 254
238
Item Description
Multicast Trigger
•
Enable—Enable the multicast trigger function of 802.1X to send multicast trigger
messages to the clients periodically for initiating authentication. By default, the
multicast trigger function is enabled.
•
Disable—Disable the 802.1X multicast trigger function.
IMPORTANT:
For a WLAN, the clients can actively initiate authentication, or the AP can discover
users and trigger authentication. Therefore, the ports do not need to send 802.1X
multicast trigger messages for initiating authentication periodically. H3C recommends
that you disable the multicast trigger function in a WLAN because the multicast trigger
messages consume bandwidth.
c.
Configure the other four port security modes
Figure 226 Port security configuration page for the other four security modes
(mac-else-userlogin-secure is taken for example)