Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 215)

Fabric OS Message Reference 193
53-1003140-01
BL-1050
5
BL-1050
Message
Incompatible Blade Processor FPGA version with current FOS firmware in slot=<slot
number> on FX8-24. Contact support for upgrade instructions.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the blade processor field-programmable gate array (FPGA) version with current Fabric OS
firmware is incompatible on the FX8-24 blade.
Recommended
Action
Contact your switch service provider for upgrade instructions.
BL-1051
Message
Incompatible Blade Processor FPGA version with current FOS firmware on 7800.
Contact support for upgrade instructions.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the blade processor field-programmable gate array (FPGA) version with current Fabric OS
firmware is incompatible on the Brocade 7800 switch.
Recommended
Action
Contact your switch service provider for upgrade instructions.
BL-1052
Message
Link Reset threshold exceeded in the internal port (slot <slot number>, port <port
number>). No core blade has been faulted because it has only one active core
blade.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the internal port in the core blade exceeded the link reset threshold level. Faulting the peer
edge blade because there is only one active core blade.
Recommended
Action
Replace the core blade.