Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 998)

976 Fabric OS Message Reference
53-1003140-01
ZONE-1062
5
ZONE-1062
Message
Defined and Effective zone configurations are inconsistent.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the defined and effective configurations are different.
Recommended
Action
Execute the cfgEnable command to make both the configurations consistent.
ZONE-1064
Message
Failed to update client capability to ESS (Exchange Switch Support) after maximum
number of retries - return code <Failed return code>. Failing sync dump to standby
CP.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that Exchange Switch Support (ESS) is unable to update its capability. Failed to send the sync
dump to standby control processor (CP).
Recommended
Action
Verify that HA synchronization has failed using the haShow command. If HA synchronization has failed,
execute the haSyncStart command on active CP to resynchronize the HA state.
ZONE-1065
Message
Zoning operation (<function>) at port index (<port index>) returns code (<error
code>). Port reset required.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates hardware and software zoning enforcement is out of sync.
Recommended
Action
Toggle the port using the portDisable and portEnable commands in order to recover zoning
enforcement.