Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 249)

Fabric OS Message Reference 227
53-1003140-01
CCFG-1011
5
CCFG-1011
Message
Linecard configuration mismatch on slot <slot>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the inserted line card is different from the pre-configured line card on the specified slot.
Recommended
Action
Execute the no linecard command to remove the line card configuration.
CCFG-1012
Message
Blade in slot <slot> failed to reach ONLINE state within <timeout> seconds after
receiving system ready.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the blade in the specified slot has failed to come online within the specified timeout interval
after receiving the system ready event.
Recommended
Action
Execute the slotPowerOff and slotPowerOn commands on the specified slot to bring the blade online.
CCFG-1013
Message
<mode_command>.
Message Type
AUDIT
Class
CFG
Severity
INFO
Probable Cause
Indicates that the switch state has changed.
Recommended
Action
No action is required.