Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 963)

Fabric OS Message Reference 941
53-1003140-01
VS-1004
5
VS-1004
Message
Could not find Virtual PWWN config file for the switch.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the virtual Port World Wide Name (PWWN) feature has been enabled for the first time on
the switch or the configuration file was corrupted or accidently removed.
Recommended
Action
Creating a new default configuration file. Execute the configDownload command to download any of
your earlier configurations for the virtual PWWN feature.
VS-1005
Message
Virtual PWWN config version mismatch detected.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the virtual Port World Wide Name (PWWN) configuration present on the switch is not of the
same Fabric OS version.
Recommended
Action
Converting the virtual PWWN configuration to the current Fabric OS version. No action is required.
VS-1006
Message
Virtualization services failed to initialize due to lack of enough memory.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the system has run out of memory.
Recommended
Action
No action is required.