Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 904)

882 Fabric OS Message Reference
53-1003140-01
SSMD-1216
5
SSMD-1216
Message
QoS failed programming interface 0x<Interface ID> Pause.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that DCE SSM encountered an unexpected error in programming the dataplane ASIC for
enforcing the interface Pause feature.
Recommended
Action
Delete and reapply the QoS Pause policy.
If the message persists, restart or power cycle the switch.
SSMD-1217
Message
QoS CEE could not comply with FCoE scheduler policy for CEE Map <CEE Map name>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that DCE SSM was unable to translate the CEE Map and Fibre Channel over Ethernet (FCoE)
configuration into an ETS scheduler policy implementable by the dataplane ASIC.
Recommended
Action
Redefine CEE Map and FCoE into a configuration that translates into an ETS scheduler policy requiring
eight or fewer traffic classes.
SSMD-1300
Message
CEE Map <ceemap> is created with precedence <precedence>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified CEE Map has been created.
Recommended
Action
No action is required.