Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 520)

498 Fabric OS Message Reference
53-1003140-01
FW-1128
5
FW-1128
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of segmentations has changed from a value outside of the acceptable range to
a value within the acceptable range. Segmentation changes might occur due to the following reasons:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1129
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of zone changes has changed. Zone changes occur when there is a change to
the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1130
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur when
there is a change to the effective zone configuration. A low number of zone configuration changes means
that the fabric is functioning normally.