Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 243)

Fabric OS Message Reference 221
53-1003140-01
C3-1030
5
C3-1030
Message
S<slot number>,P<port number>(<blade port number>): Internal CRC with good EOF
errors exceeded threshold, tuning is required. current:0x<last_crc_good_eof_cnt>,
last:0x<total_crc_good_eof_cnt> thresh2:0x<threshold_used>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates some CRC errors detected on backend link by hardware, applications may be affected.
Recommended
Action
If core blade reset, auto tuning or manual tuning did not resolve the issue, replace the blade.
C3-1032
Message
S<slot number>,P<port number>(<blade port number>): Required buffer unavailable
for the port. req_buf:<required buffer> port_buf:<port buffer> unused_buf:<Unused
buffer> est_buf:<Estimated buffer>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that free buffers in the chip are not sufficient to bring the port online in fully operational mode.
The port may not come online or may operate in a degraded buffer mode.
Recommended
Action
If one or more ports that are configured as long distance in the chip are unused, reset these ports to
normal distance. If the problem persists, move the affected port to a different blade or chip.
C3-1033
Message
S<slot number>,P<port number>(<blade port number>): FEC TTS is only supported on
F_Port.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that Forward Error Correction (FEC) TTS is enabled on the specified port. The FEC TTS option
is supported only on F_Ports.
Recommended
Action
Disable the FEC TTS option using the portcfgfec --disable -TTS command.