Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 231)

Fabric OS Message Reference 209
53-1003140-01
C2-1019
5
C2-1019
Message
S<slot number>,C<chip index>: HW ASIC Chip TXQ FID parity error threshold reached
type = 0x<chip error type>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware
that may degrade the data traffic.
Recommended
Action
Restart the system at the next maintenance window.
C2-1020
Message
S<slot number>,P<port number>(<blade port number>): Internal CRC with good EOF
errors were observed, continuing monitoring. current:0x<last_crc_good_eof_cnt>,
last:0x<total_crc_good_eof_cnt> thresh1:0x<threshold_used>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates some CRC errors detected on backend link by hardware, typically applications are not affected
at this low count.
Recommended
Action
No action is required.
C2-1025
Message
S<slot number>,P<port number>(<blade port number>): Extra credit on
F_port:ftx=<ftx> curr_cred=<current credits> actual_cred=<actual credits>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
Action
When this error is observed persistently, replace the device.