Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 927)

Fabric OS Message Reference 905
53-1003140-01
SULB-1042
5
SULB-1042
Message
Firmwareactivate command has completed successfully.
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that the firmwareActivate command has completed successfully and the switch firmware has
been updated.
Recommended
Action
No action is required. The firmwareActivate command has completed as expected.
Run the firmwareShow command to verify the firmware versions.
SULB-1043
Message
Firmwareactivate command failed. <error string>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the firmwareActivate command failed. The error string value indicates the reason for
failure.
Recommended
Action
Run the firmwareShow command to verify the firmware versions.
SULB-1044
Message
Firmwaredownload to secondary partition has completed successfully.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the firmwareDownload command to the secondary partition has completed successfully
and the switch will come up with the updated firmware on reboot.
Recommended
Action
No action is required. The switch will auto-reboot with the downloaded firmware.