Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 463)

Fabric OS Message Reference 441
53-1003140-01
FICN-1091
5
FICN-1091
Message
DevTeraEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Selective Reset sequence for a device.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.
FICN-1092
Message
DevTeraEgr:FICON Purge received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Purge Path command sequence for a device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1093
Message
DevTeraIng:Auto Sense Data received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Bytes0-0xB=0x<bytes 0-3 of sense
data from the device><bytes 4-7 of sense data from the device><bytes 8-0x0b of
sense data from the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON tera write pipelining processed sense data from a FICON device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.