Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 408)

386 Fabric OS Message Reference
53-1003140-01
FCR-1021
5
3. Use zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge
fabrics.
4. Use the portEnable command on each EX_Port, one at a time, and verify that this error is not
reported again.
FCR-1021
Message
Local LSAN device entries exhausted while updating LSAN zone <zone name> device
entries.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of devices created through logical storage area network (LSAN) zones within
the MetaSAN exceeds the local LSAN zone database limitations.
Recommended
Action
Remove excess device entries within LSAN zones so that the number of devices is within the range of
the local zone database limitations.
FCR-1022
Message
Local proxy device slot entries exhausted.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that resources to persistently store the proxy device slot to the remote world wide name (WWN)
have been consumed.
Recommended
Action
Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by
removing logical storage area network (LSAN) zone entries.
FCR-1023
Message
Local phantom port WWN entries exhausted.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of port World Wide Names (WWNs) detected to be in use exceeds the local
port WWN resources.
Recommended
Action
Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the
number of translate domains). You can also limit the number of proxy devices for a translate domain
(which limits the number of translate domain ports required) by limiting the devices specified in logical
storage area network (LSAN) zones.