Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 825)

Fabric OS Message Reference 803
53-1003140-01
SEC-1306
5
SEC-1306
Message
Failed to verify certificate with root CA.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the certificate could not be verified with root certificate authority (CA). This could happen if an
unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a root CA
certificate does not exist on the switch.
Recommended
Action
Run the secCertUtil show -fcapall command and verify that all public key infrastructure (PKI) objects
exist on the switch. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects
outlined in the Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized
switch is not trying to access the fabric.
SEC-1307
Message
<Security server (RADIUS/LDAP/TACACS+)> server <Server name> authenticated user
account '<username>'.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that after some servers timed out, the specified RADIUS, LDAP, or TACACS+ server
responded to a switch request.
Recommended
Action
If the message appears frequently, move the responding server to the top of the
RADIUS/LDAP/TACACS+ server configuration list using the aaaConfig command.
SEC-1308
Message
All <Radius/LDAP/TACACS+ server identity> servers failed to authenticate user
account '<username>'.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that all servers in the RADIUS, LDAP, or TACACS+ configuration have failed to respond to a
switch request within the specified timeout.
Recommended
Action
Verify the switch has proper network connectivity to the specified RADIUS, LDAP, or TACACS+s servers,
and the servers are correctly configured.