Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 232)

210 Fabric OS Message Reference
53-1003140-01
C2-1026
5
C2-1026
Message
S<slot number>,P<port number>(<blade port number>): Faulting F_port due to extra
credit detected:ftx=<ftx> curr_cred=<current credits> actual_cred=<actual
credits>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
Action
When this error is observed persistently, replace the device.
C2-1027
Message
Detected credit loss on Peer internal Port of Slot <slot number>, Port <port
number>(<blade port number>) vc_no=<vc number> crd(s)lost=<Credit(s) lost>
complete_loss:<complete credit loss>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that credit loss was detected on the peer port.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C2-1028
Message
Detected excessive Link resets on the port in a second. Slot <slot number>, Port
<port number>(<blade port number>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the port received excessive link resets from peer port within 1 second and that exceeded
threshold.
Recommended
Action
When this error is observed persistently, change the small form-factor pluggable (SFP) transceiver or the
cable on the peer port to which this port is connected.