Snmp-1009, Snmp-1010 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 862
840
Fabric OS Message Reference
53-1003140-01
SNMP-1009
5
SNMP-1009
Message
Port traps are <blocked state> on port <port>.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates the blocked or unblocked status of the port traps on the specified port.
Recommended
Action
Execute the snmpTraps --show command to view the current status of the port.
SNMP-1010
Message
Unsupported security protocol settings detected. Setting SNMP usm privacy protocol
configuration to default configuration.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the SNMP User-based Security Model (USM) privacy protocol configuration was found to
be incorrect after HA synchronization with version Fabric OS v7.1.0.
Recommended
Action
Execute the snmpConfig --show command to view the new SNMP configuration.