Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 445)

Fabric OS Message Reference 423
53-1003140-01
FICN-1039
5
FICN-1039
Message
HostIng:FCUB Lookup failed for Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR>********.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a locally connected FICON channel sent a frame that could not be associated with a FICON
Control Unit.
Recommended
Action
Contact your vendor's customer support for assistance.
FICN-1040
Message
HostTapeEgr:Tape:CmdReject Sense Data Rcvd:Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmds=0x<Last 4
commands received from the channel for this device> SenseData:Bytes0-0xB=0x<Bytes
0-3 of sense data from the device><Bytes 4-7 of sense data from the device><Bytes
8-0x0b of sense data from the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active disk emulation device received a FICON Purge Path from the channel.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1041
Message
HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmd=0x<Last 4
commands issued to this device from the channel> LastStatus=0x<Last 4 status
values sent to the channel from this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a Link Level Reject (LRJ) received from a device indicates that the Control Unit has lost the
logical path to the Logical Partition (LPAR).
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.