Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 594)

572 Fabric OS Message Reference
53-1003140-01
FW-1517
5
FW-1517
Message
<Port Name> <Label>, has crossed lower threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of protocol errors that the port experiences has changed and crossed the lower
threshold boundary to a value within the acceptable range. Occasional protocol errors occur due to
software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1518
Message
<Port Name> <Label>, has dropped below upper threshold boundary to in
between(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of protocol errors that the port experiences has changed and dropped below
the upper threshold boundary to a value within the acceptable range. Occasional protocol errors occur
due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1519
Message
<Port Name> <Label>, has crossed lower threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of invalid words that the port experiences has changed and crossed the lower
threshold boundary to a value within the acceptable range. Invalid words usually indicate a hardware
problem with a small form-factor pluggable (SFP) or cable.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.