Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 895)

Fabric OS Message Reference 873
53-1003140-01
SS-1012
5
SS-1012
Message
BP supportsave failed. The /mnt of Active CP does not have enough disk space to
collect BP supportsave files.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a chassis with the blade processor (BP) does not have enough disk space in the
secondary partition of the active CP to save the supportsave files, before uploading them to the remote
host.
Recommended
Action
Manually clean up the secondary partition of the active CP to collect the supportsave files.
SS-1013
Message
supportSave's upload operation aborted. username or password is not provided.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the username or password parameters were not specified with the supportSave
command in non-interactive mode.
Recommended
Action
Specify both username and password or neither of them. If no username and password are specified,
anonymous FTP will be used to collect the supportsave files.