Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 490)

468 Fabric OS Message Reference
53-1003140-01
FSPF-1012
5
Recommended
Action
Investigate current ICL configuration to ensure that all recommendations for cabling are satisfied.
FSPF-1012
Message
All existing ICL topology imbalances have been corrected.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the existing inter-chassis link (ICL) configuration that was resulting in an unbalanced
topology has been corrected.
Recommended
Action
No action is required.
FSPF-1013
Message
Exceeded maximum number of supported paths (16) to one or more remote domains.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there are more than 16 (maximum number of paths supported) available shortest cost
paths to reach one or more remote domains. Traffic may be impacted or follow unexpected traffic
patterns.
Recommended
Action
Use the fabricShow -paths, topologyShow, and lsDbShow commands to get additional details about
which remote domains are violating the maximum paths limit. Refer to the Fabric OS Administrator's
Guide for information on the causes and potential impacts.
FSPF-1014
Message
All previously reported maximum path violations have been corrected.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that all existing violations of the maximum paths limit have been corrected.
Recommended
Action
No action is required.