Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 480)

458 Fabric OS Message Reference
53-1003140-01
FICU-1010
5
FICU-1010
Message
FMS mode enable failed due to port(s) with areas 0xFE or 0xFF is(are) connected to
device(s).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the FICON Management Server (FMS) mode was not enabled because ports with areas
0xFE or 0xFF are connected to devices.
Recommended
Action
Disable ports with areas 0xFE or 0xFF using the portDisable command.
FICU-1011
Message
FMS mode has been enabled.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that the FICON Management Server mode (fmsMode) has been enabled.
Recommended
Action
No action is required.
FICU-1012
Message
FMS mode has been disabled.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that the FICON Management Server mode (fmsMode) has been disabled.
Recommended
Action
No action is required.