Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 837)

Fabric OS Message Reference 815
53-1003140-01
SEC-1342
5
SEC-1342
Message
HIF mode is enabled. <Warning>
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the local switch received a remote distribution for Switch Connection Control (SCC) policy
or fabric-wide data distribution configuration. This may modify SCC policy or strict SCC mode
configuration in Fabric Data Distribution (FDD). This configuration change may lead to unexpected
behavior when High Integrity Fabrics (HIF) is enabled.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1343
Message
PWD policy distributed successfully from Switch <Switch WWN>. User configuration
and Password configuration is enforced successfully.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates password database distribute from switch is successful in the Access Gateway (AG) mode.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
SEC-1344
Message
Frequency of security violations exceed limit. Counters will be dropped
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates that violation counter updates may be dropped. High number of security violations on the
switch.
Recommended
Action
Identify and address the reason for security violations.