Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 747)

Fabric OS Message Reference 725
53-1003140-01
PSWP-1001
5
PSWP Messages
PSWP-1001
Message
PID for port <wwn name corresponding to source port> and port <wwn name
corresponding to destination port> are swapped. New PID for port <wwn name
corresponding to source port> is 0x<wwn name corresponding to destination port>
and port <new area corresponding to source wwn> is 0x<new area corresponding to
destination wwn>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the portSwap command has been issued.
Recommended
Action
No action is required.
PSWP-1002
Message
Port Swap feature enabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the port swap feature has been enabled in the switch.
Recommended
Action
No action is required.
PSWP-1003
Message
Port Swap feature disabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the port swap feature has been disabled in the switch.
Recommended
Action
No action is required.