Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 436)

414 Fabric OS Message Reference
53-1003140-01
FICN-1012
5
FICN-1012
Message
DevDiskIng:Device level exception found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID that
was reported in the Device Level Exception Frame>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a Device Level Exception frame received from the FICON direct attached storage device
(DASD) Control Unit.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1013
Message
DevDiskIng:Status=0x<Status that was received from the DASD device in an odd
state> received in odd state=0x<The current emulation state> from
Path=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR CUADDR
DeviceAddr> sent LBY.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that when the device sent the status in an incorrect state, the emulation processing rejected the
status with an LBY frame.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1014
Message
DevEgr:Device level exception flag found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID used
to deliver the non-AS Device Level Exception>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a frame was received that indicated a device level exception.
Recommended
Action
If there was an I/O failure associated with this event, contact your vendor's customer support for
assistance.