Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 988)

966 Fabric OS Message Reference
53-1003140-01
ZONE-1015
5
ZONE-1015
Message
Not owner of the current transaction <transaction ID>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a zoning change operation is not allowed because the zoning transaction is opened by
another task. Indicates concurrent modification of the zone database by multiple administrators.
Recommended
Action
Wait until the previous transaction is completed. Verify that only one administrator is working with the
zone database at a time.
ZONE-1017
Message
FA Zone(<zone name>) contains incorrect number of Initiator and Target devices.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the fabric assist (FA) zoning configuration has more than one initiator. This is because of
incorrect entries in the FA zoning configuration.
Recommended
Action
Edit the zone database to make sure that only one initiator is set for each FA zone configuration.
ZONE-1019
Message
Transaction Commit failed. Reason code <reason code> (<Application reason>) -
\"<reason string>\".
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that reliable commit service (RCS) had a transmit error. RCS is a protocol used to transmit
changes to the configuration database within a fabric.
Recommended
Action
Often this message indicates a transitory problem. Wait a few minutes and retry the command.
Make sure your changes to the zone database are not overwriting the work of another administrator.
Execute the cfgTransShow command to determine if there is any outstanding transaction running on the
local switches.
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.