Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 750)

728 Fabric OS Message Reference
53-1003140-01
RAS-1001
5
RAS Messages
RAS-1001
Message
First failure data capture (FFDC) event occurred.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a first failure data capture (FFDC) event occurred and the failure data has been captured.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
RAS-1002
Message
First failure data capture (FFDC) reached maximum storage size (<log size limit>
MB).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the storage size for first failure data capture (FFDC) has reached the maximum.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
RAS-1004
Message
Software 'verify' error detected.
Message Type
LOG | FFDC
Severity
WARNING
Probable Cause
Indicates an internal software error.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.