Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 852)

830 Fabric OS Message Reference
53-1003140-01
SEC-3046
5
SEC-3046
Message
The FIPS Self Tests mode has been set to <Self Test Mode>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates there was a change in the Federal Information Processing Standards (FIPS) Self Test mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3047
Message
Info: RBAC permission for a CLI command: <Cmd Name> is failed.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the user does not have permission to execute this command.
Recommended
Action
Verify the user has the required permission to execute this command.
SEC-3048
Message
FIPS mode has been enabled in the system using force option.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the system has been forced to Federal Information Processing Standards (FIPS) mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Look for the status of the prerequisites that did not conform to FIPS mode.