Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 612)

590 Fabric OS Message Reference
53-1003140-01
HAMK-1004
5
HAMK-1004
Message
Resetting standby CP (double reset may occur).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. Typically, this
message is displayed when the standby CP has been restarted. Note that in certain circumstances, a CP
may experience a double reset and restart twice. A CP can recover automatically even if it has restarted
twice.
Recommended
Action
No action is required.