Log-1003, Log-1004, Log-1005 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 665
Fabric OS Message Reference
643
53-1003140-01
LOG-1003
5
LOG-1003
Message
The log has been cleared.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the persistent error log has been cleared.
Recommended
Action
No action is required.
LOG-1004
Message
Log message <Log message that has been blocked> flooding detected and blocked.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a message has been flooding and was blocked.
Recommended
Action
Execute the reboot command.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
LOG-1005
Message
Log message <Log message that has been disabled> has been disabled.
Message Type
AUDIT | LOG
Class
RAS
Severity
INFO
Probable Cause
Indicates that the specified message has been disabled from logging.
Recommended
Action
No action is required.