Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 831)

Fabric OS Message Reference 809
53-1003140-01
SEC-1324
5
SEC-1324
Message
Fabric transaction failure. RCS error: <Error code>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the reliable commit service (RCS) transaction failed with the specified reason code.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
SEC-1325
Message
Security enforcement: Switch <switch WWN> connecting to port <Port number> is not
authorized to stay in fabric.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that because of a Switch Connection Control (SCC) policy violation, the switch is being
disabled on the specified port.
Recommended
Action
No action is required unless the switch must remain in the fabric. If the switch must remain in the fabric,
add the switch World Wide Name (WWN) to the SCC policy, and then attempt to join the switch with the
fabric.
SEC-1326
Message
Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set
to <Fabric-wide configuration set by user>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the specified event has occurred.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.