Metrohm 796 Titroprocessor - Manual (Page 11)

1. Introduction
796 Titroprocessor, Instructions for use 55
1.3.5 Measuring interfaces / Measuring inputs
The 796 Titroprocessor models 2.796.0110 and 2.796.0120 are equipped
with 2 measuring interfaces (Sensors A and Sensors B).
The diagram below shows where the sensors are to be connected to meas-
uring interface A, which is found on all 796 Titroprocessor models.
1
Ind A2 Ind A1 Ref Pol Pt100/1000
Sensors A
1.3.6 Data cards / Key cards
Data cards can be used to store methods or measuring data and to transfer
them from one instrument to another. They are an excellent mobile storage
medium.
Key cards enable every user to have his own specific methods and user in-
terface settings.
Data cards or key cards are to be insertet in the memory card slot on the
right hand side of the 796 Titroprocessor.
Data
card
Attention must be paid to several points when handling data cards.
Stirrer Int A con-
nector
Indicator electrode
A2
Indicator electrode
A1
Pt100 / Pt1000
Temperature sensor
Reference
electrode
Polarized
electrode
Right-hand side of housing
Eject button
Notch