Metrohm 796 Titroprocessor - Manual (Page 283)

13. Appendix
796 Titroprocessor, Instructions for use 277 277
13.3.4 Modifying an existing Access Control file
When opening the 'File' dialog on the Access Control page, you can activate
the settings of a key card by loading the Access Control file on the data
card.
Select 'Data card' for storage, move the cursor to the 'Name' entry field and
press the space bar.
ЪДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
ЪДДД Files Äij personal :Personal key file ³ДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ АДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ ³
³ Name .acf ³
³ Comment ³
³ Storage Data card ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
Pressing <ENTER> and the softkey [Load] will load the settings of the Ac-
cess Control file. The settings (softkeys and status settings) can then be
edited at will.
13.3.5 Monitoring a key card
A key card can be used as a 'key' to open the dialog pages of the 796 Titro-
processor. After signing on, the key card may be removed from the card
slot.
The monitoring function enables an operating mode, which requires a key
card constantly inserted. Removing the key card will result in an automatic
sign-off, which forces a new sign-on request. The access to the 796 Titro-
processor's functions will be locked, until another key card is inserted.
In order to ensure finishing the running determinations, the presence of a
key card is checked
after the end of a single determination or a sample
series (with
'auto start on'
).
The monitoring function can be initialized on the configuration page of the
796 Titroprocessor, see below.
³ User level Standard
³
³ Key card yes
³ Monitoring on
³
With
'Monitoring on '
a missing key card will lock the access to the in-
strument.
ÚÄÄÄSign onÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ Please insert a valid key card and ³
³ press ENTER! ³
³ ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ENTER ДЩ