Metrohm 796 Titroprocessor - Manual (Page 221)

9. Results and statistics
796 Titroprocessor, Instructions for use 215 215
[*Param]
allows the EP recognition criteria and the curve display to
be processed.
ЪДДДДДДДВДДДДДДДВДДДДДДД¿
³ EP ³Curve ³ ³
³Recogn.³display³ ³
АДДДДДДДБДДДДДДДБДДДДДДДЩ
See pages 139ff and 142ff.
[*Formula]
opens the dialog window for altering the calculation
formulas for recalculations, see page 119ff.
[*Report]
opens the dialog window for altering the report of the
selected data record.
[Local
ComVars]
opens the dialog window for altering the local common
variables. These are copies of the common variables
which were valid at the time of the determination.
[Calib.
data]
opens a window to display the calibration data for pH
measurements and pH titrations.
ЪДДД Calibration data ДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ Meas. input A1 ³
³ Cal. sensor ³
³ Cal. method manual ³
³ Cal. date 1999-12-10 ³
³ Cal. time 14:19:08 ³
³ Temperature 25.0 §C ³
³ pH(as) 6.956 ³
³ Slope 0.998 ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
These are the calibration data which were valid at the time
of the determination.
[>> >>]
switches to the second softkey bar.
[Extend.
values]
opens a window for displaying further values of the
selected titration or measurement. These are the data
which are stored in the system variables.
ЪДДД Extended Values: #2 DET_pH* ДДДДДДДДДДД¿
³ ³
³ Initial ³
³ time 14:38:13 ³
³ meas. value IM pH 4.701 ³
³ temperature IT 25.0 §C ³
³ ³
³ Start ³
³ meas. value SM pH 4.704 ³
³ volume SV 4.507 mL ³
³ temperature ST §C ³
³ duration SD 38.6 s ³
³ ³
³ Closing ³
³ meas. value CM pH 9.132 ³
³ volume CV 8.701 mL ³
³ temperature CT §C ³
³ ³
³ Measure duration MD 220.5 s ³
³ Stop condition meas. value ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
System variables