Metrohm 796 Titroprocessor - Manual (Page 72)

4.5 Stirrer at measuring interface
796 Titroprocessor, Instructions for use 66 66
[Shift
auto]
rotates the rack automatically. The shortest rotary path is
selected.
4.5 Stirrer at measuring interface
Each measuring group of the Titroprocessor 796 is equipped with a stirrer
connection (12 V) to which various stirrers can be connected. These
include:
• 728 Magnetic stirrer 2.728.0040
• 722 Rod stirrer 2.722.0010
• 727 Ti-Stand with rod stirrer 2.727.0010
• 727 Ti-Stand with magnetic stirrer 2.727.0100
• 703 Ti-Stand 2.703.0010
The stirrer connection of a measuring group (see rear view of instrument,
page 4) is switched on as standard. It can be switched on the 'Manual
control page' (
<MAN CONTROL> key) with the [Stirrer on/off]
softkey. If necessary select the first measuring group ('Sensors at
interface A/B'
) with the <PG DN> and <TAB> keys.
The status of the stirrer connection is always shown at the bottom right-hand
side.
Apol ³
³
³
7.000 Stirrer on ³
1.000 ³
³
ДДДДДДДДДДДДДДДДДДДДДДДД QUIT ДЩ
ДДД¿ ЪДДДДДДДВДДДДДДДВДДДДДДД¿
³ ³ ³Stirrer³Remote ³
³ ³ ³on/off ³lines ³
ДДДЩ АДДДДДДДБДДДДДДДБДДДДДДДЩ
4.6 Remote lines (Input / Output)
The [Remote lines] softkey on the 'Manual control page'
(
<MAN CONTROL> key) opens the dialog window of the remote
connection of the Titroprocessor 796.
ЪДДД Remote lines: A ДДДДДД¿
³ ³
³ I/O Status 76543210 ³
³ ДДДДДДДДДДДДДДДДДДДДДДДД ³
³ Input 00000001 ³
³ Output
****0001 ³
³ ³
АДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
Here the conditions of the logical input lines can be seen and the
conditions of the output lines can be set.
The output lines can be set individually (
1) or reset (0). Lines which are not
to be altered can be given an ' *'. Further details can be found on pages 200f
and 29f.