. installation installation, External bus, Dosing devices power cables – Metrohm 796 Titroprocessor User Manual
Page 31: 4 sample changers
22. . Installation
Installation
796 Titroprocessor, Instructions for use
25
25
700
685
Dosimat B2
Dosimat B1
729
Dosimat B3
Dosimat B4
EBus
Address 1
EBus
Address 2
External Bus
EBus
Address 1
717
717
700
685
Dosimat C2
Dosimat C1
729
Dosimat C3
Dosimat C4
EBus
Address 2
700
685
Dosimat A2
Dosimat A1
700
685
Dosimat A4
Dosimat A3
Line distributor
Dosing
devices
Power cables
796
2.6.4 Sample changers
External Bus
B
One or two 717 Sample changers can be connected to the 'external
bus' sockets of the 796 Titroprocessor. Take care that the address
selector disk is set correctly (see above). Please connect up larger
systems according to the above diagram.
Two 717 Sample changers can be connected at the same time;
however, they cannot be used simultaneously in one automatic
method. It is possible to change the active sample changer within a
method (see command '
CHANGER').
Manual operation of a sample changer while the other sample
changer is busy carrying out a method is possible and does not
present any problems.