Metrohm 796 Titroprocessor - Manual (Page 35)

22. . Installation Installation
796 Titroprocessor, Instructions for use 29 29
2.6.7 Connecting an external printer
There are various ways of connecting an external printer to the 796 Titro-
processor.
Parallel printer interface (only for models 2.796.0010 and 2.796.0110)
Printer
F
Commercial printers for PCs (e.g. inkjet printers from Hewlett-Packard, Ep-
son, Canon) can be connected without any problems to the
'Printer' con-
nection on the rear panel of the Titroprocessor with the cable supplied by
the manufacturer.
So-called GDI printers (e.g. HP Deskjet 620 or 820) are specially
designed for use under MS-Windows © and can only be used under
MS-Windows © . They cannot be used with the 796 Titroprocessor.
Printer on the serial RS 232 interface
RS 232 Interface 1
RS 232 Interface 2
G
It is also possible to connect an external printer to models 2.796.0020 and
2.626.120. Printers which have their own serial RS 232 interface can be
connected directly to '
RS 232 Interface 1' or 'RS 232 Interface 2' with the
aid of cable 6.2125.050 (e.g. Epson LX-300).
If necessary commercial printers with a parallel Centronics interface can be
connected to one of the RS 232 interfaces of the Titroprocessor by means
of serial/parallel converter SP 1000 (2.145.0300). In addition a serial
6.2125.020 connection cable is required. Depending on the type of printer a
9V mains adapter for the SP 1000 converter and possibly an extension
cable between the converter and printer may be required. Please consult
your local Metrohm distributor.